When it comes to high-performance driving, we all know that braking performance is just as important as acceleration and cornering. So, to gain performance from your factory BMW G8x M2, M3, or M4’s brakes, our RP650 front brake pads are an essential upgrade.

Bedding in: Typically, heavy braking on the road will generate approximately 1 to 1.1G of deceleration. At this rate, ABS will be activated on such equipped vehicles. A moderate braking effort is needed to properly break in rotors and pads. A stopping force of approximately 0.8Gs, just short of ABS intervention is a general estimate of pedal effort you are trying to achieve. After completing the installation, make a series of 10 stops from 60mph (100kph) to 5-10mph (10-15kph). At the end of each stop, immediately accelerate back up to around 60mph (100kph) again for the next stop (the exact speed is not critical). As you decrease to around 5-10 MPH (10-15kph), it is not necessary to watch the speedometer, keep your eyes on the road, and approximate your speed at the end of each cycle. Do not come to a complete stop, as you will imprint pad material onto the disc, risking a vibration. On the 8th or 9th stop, there should be a distinct smell from the brakes. Smoke may be evident after several stops as well. Also, by the 8th or 9th stop, some friction materials will experience green fade. This is a slight fading of the brakes. The fade will stabilise, but not completely go away until the brakes have cooled.

Features:

• Excellent cold bite
• High temperature fade resistance
• Plug-and-play OE replacement

What’s Included:

• MMX MMR RP650 OE Replacement Brake Pads Front G8X (Fast Road)